EIE-170-012 Sample Preparation Bath

EIE-170-012 Sample Preparation Bath is supporting equipment designed and used for the Abel Flash Point Analyzer. It is used in petroleum, chemical, aviation, scientific research and production.

Technical Specifications

1. Sample Bottle Volume: 1 L
2. Temperature Control Range: -10°C – 35°C (external refrigeration equipment required)
3. Display resolution: 0.1°C
4. Temperature accuracy: ±1°C
5. Power supply Voltage: AC 220V ±10%, 50/60 Hz
6. Total Power: 15W
7. Dimensions: 300mm x 240mm x 386mm (L × W × H)
8. Weight: 8.2Kg

Operating Environment:

1. Ambient temperature: 5°C – 40°C
2. Relative humidity: < 80% at 35°C
3. Indoor

EIE-170-008 Constant Low Temperature Water Bath is designed by EIE using the advanced modern concept, mainly used for colleges and universities, medical, food, petrochemical, health and epidemic prevention, environmental monitoring where need low-temperature thermostatic experimental conditions for scientific research or production.

Technical Specifications

1. Temperature Range: -30°C – 50°C
2. Display resolution: 0.1°C
3. Temperature accuracy: ±0.1°C
4. Power supply Voltage: AC 220V ±10%, 50/60 Hz
5. Total Power: 900W
6. Dimensions: 604mm x 245mm x 660mm (L × W × H)
7. Weight: 35Kg

Operating Environment:

1. Ambient temperature: 5°C – 40°C
2. Relative humidity: < 80% at 35°C
3. Indoor

The Automatic Abel Flash Point Tester, developed by Canada Etech International Enterprises Inc. (EIE), uses the most advanced international design concepts and test methods in the world, which improves the automation degree of the flash point tester, guarantees the measurement accuracy, and minimized the adverse consequences caused by operator errors.

Under the specified testing conditions, the test flame will ignite the sample vapour and spread to the liquid’s surface, where the lowest temperature can be achieved and corrected under the atmospheric press of 101.3 kPa. The flash point is a safety

The Automatic Abel Flash Point Tester, developed by Canada Etech International Enterprises Inc. (EIE), uses the most advanced international design concepts and test methods in the world, which improves the automation degree of the flash point tester, guarantees the measurement accuracy, and minimized the adverse consequences caused by operator errors.

Under the specified testing conditions, the test flame will ignite the sample vapour and spread to the liquid’s surface, where the lowest temperature can be achieved and corrected under the atmospheric press of 101.3 kPa. The flash point is a safety

ASTM D93-2010, ISO 2719, GB/T 261-2008
One-Button Start. The tester can automatically perform the ignition, heating , stirring, detection, pressure correction at flash point, printing, and colling.
An advanced 32-bit ARM processor, a high-precision platinum resistor, and 24-bit analog-to-digital converter.
The first non-contact stirring method.
Build-in the atmospheric pressure sensor.

The Touchless Automatic Pensky Martens Flash Point Tester, developed by Canada Etech International Enterprises Inc. (EIE), uses the most advanced international design concepts and test methods in the world, which improves the automation degree of the flash point tester, guarantees the measurement accuracy, and minimized

ASTM D92, ISO 2592:2017, IP 36, GB/T 3536
One-key start
Machine Vision Technology to detect flash point
Widely used in petroleum, electric power, railway, aviation, water transportation, national defence and scientific research etc.

EIE-FP92-3, the Cleveland Open Cup Flash Point Tester, is developed by Etech International Enterprises Inc. (EIE) Canada. It adopts advanced design concepts and combines machine vision image recognition technology, which pushes the automation of the flash point tester to a higher level. It ensures the accuracy, repeatability and reproducibility of the measurement. The traditional flash point method, electrode ion detection, which